Who else isn’t happy with their $500 purchase?
As promising as the iRobot Braava Jet M6, the tire marks/smears/excess water it leaves behind are some of its BIGGEST flaws. There have also been reports of the jet m6 not spraying water. Try the tricks in this guide if and when that’s the case.
Pending the time iRobot addresses those issues, though. Here are six things you can do differently (particularly if you’re having trouble with tire marks/streaks) to get optimal performance from the Braava Jet M6.
Tip #1: Try distilled water, replace pads, and wipe the wheels.
Tip #2: Consider washable pads. Washable pads, in my opinion, are cost-efficient and better at handling stains than the paper pads. A pack of eight on Amazon is about $20.
Tip #3: Prep the floor. You might want to run the sweeping mode of the Braava M6 or vacuum the floor if your house receives lots of foot traffic or if you live in a place where dust traffic in high volume. That way, there is less mess to go around.
Tip #4: Consider adjusting mop settings. The Braava M6 supports standard, deep, and extended mopping modes. Executing the extended mode can minimize the overlapping of the tire.
Tip #5: Consider adjusting water settings. The Braava M6 supports water regulation in the app. It would help if you tried running the M6 in a low water setting.
Tip #6: Consider a washing robot. Mopping robots, of which the M6 is one, make use of pads for wiping the floor. As a result, the collected grime and messes get redistributed, causing dirty streaks.
Washing robots, on the other hand, suck up and store dirty water separately. Not only that, washing robots wipe the floor with their scraper/squeegee. You should check out the iLife Shinebot W400 or one of the Scooba’s (if you find one) if you’re concerned about tire marks and dirty streaks or considering an alternative to the Braava Jet M6.
The six tips above should help to prevent, eliminate, or at least make tire marks and dirty streaks of the Braava M6 less noticeable.
While I tried to avoid recommendations that could cause malfunctioning of your device or void its warranty, do take note that the manufacturer does not sanction the above information.
Finally, contact iRobot if you tried the above without success or if you’re in doubt about anything.